AAS RAW PHARMA USA
EnglishNederlandsFrançaisDeutschItalianoPolskiРусскийEspañolPortuguês do Brasil

anabolic-androgenic steroid AAS

» anabolic-androgenic steroid AAS

  • Specifications
  • Features

Table of Contents

Raw Testosterone Base Powder 99.8% Purity

Testosterone Base Powder is a steroidal raw material consisting of testosterone with no ester attached. AAS Raw Pharma supplies white or off-white crystalline raw testosterone base powder with a stated minimum assay of 99% for qualified laboratory research, analytical reference work, method development, and legally authorised manufacturing.

The compound is identified by CAS 58-22-0, EINECS 200-370-5, molecular formula C19H28O2, and molecular weight approximately 288.42 g/mol. These identifiers are independently supported by PubChem, the NIST Chemistry WebBook, and established reference-standard suppliers.

Because no ester group is present, the full mass of the material is testosterone itself. A 100 mg quantity of testosterone base contains 100 mg of the active steroid, whereas 100 mg of an esterified testosterone such as enanthate, cypionate or decanoate contains less than 100 mg of testosterone once the ester weight is excluded. That is the practical difference between this product and every testosterone ester.

AAS Raw Pharma supports sample, development, and bulk enquiries subject to product availability, customer verification, destination regulations, and a documented lawful end use.

Important notice: This listing is for a bulk chemical raw material. It is not a finished medicine, sterile injectable preparation, dietary supplement, or consumer product, and it is not intended for direct human or veterinary administration. Testosterone is a controlled substance in many jurisdictions. Buyers are responsible for confirming that purchase, possession, importation, handling, storage, processing, and intended use are lawful.

Testosterone Base Powder Overview

Testosterone Base Powder is the principal natural androgen in humans and other vertebrates. As a raw material for laboratory and manufacturing work, it is supplied as the unesterified parent compound — the “base” form. It differs from testosterone propionate, phenylpropionate, isocaproate, decanoate, cypionate, enanthate, and undecanoate precisely because it carries no ester chain at the 17-beta position.

That structural difference has three practical consequences for a raw-material buyer:

  • Mass efficiency. No ester fraction dilutes the active content, so base powder delivers more testosterone per milligram of material.
  • Identity. It is a single, well-defined compound with one CAS number, one formula, and one molecular weight — not a blend or mixture.
  • Physical and formulation behaviour. It is a crystalline solid with distinct melting, solubility, and stability characteristics, and it requires its own documented storage and handling conditions.

AAS Raw Pharma supplies this material as a bulk ingredient for professional use. It has not been formulated into a product, sterilised, concentration-adjusted, or released as a finished medicine.

Testosterone Base Powder Specifications

Specification Product details
Product name Testosterone Base Powder
Alternative description Testosterone, no ester
Chemical name 4-Androsten-17-beta-ol-3-one
Alternative chemical name 17-beta-Hydroxyandrost-4-en-3-one
CAS number 58-22-0
EINECS number 200-370-5
Molecular formula C19H28O2
Molecular weight 288.42 g/mol
Exact mass 288.4244
Appearance White or off-white crystalline powder
Physical form Crystalline solid
Melting range Approximately 153-157 degrees C
Solubility Practically insoluble in water; soluble in alcohol and several organic solvents
Stated assay 99% minimum, subject to batch documentation
Listed grade Pharmaceutical raw-material grade
Packaging Sealed foil bag or tin
Documentation Batch-specific COA and technical documents where available
Intended users Qualified laboratories, institutions, and authorised manufacturers
Direct administration Not permitted; this is not a finished product

The CAS number, formula, and molecular weight are confirmed by PubChem, which records testosterone under CID 6013 with formula C19H28O2 and molecular weight 288.4 g/mol. PubChem NIST reports a molecular weight of 288.4244. NIST Chemistry WebBook

Melting range and appearance are drawn from supplier Safety Data Sheets, which describe a white powder solid with a melting point of roughly 153-156 or 153-157 degrees C and practical insolubility in water. Cayman Chemical SDS PCCA SDS

Final acceptance should be based on the batch label, agreed purchase specification, available Certificate of Analysis, and the customer’s own quality procedures.

Chemical Identity of Testosterone Base

The substance is identified by:

  • CAS number: 58-22-0
  • EINECS: 200-370-5
  • Molecular formula: C19H28O2
  • Molecular weight: 288.42 g/mol
  • Exact mass: 288.4244
  • InChIKey: MUMGGOZAMZWBJJ-JZJKZLICSA-N

NIST records the InChIKey and lists synonyms including 4-androsten-17-beta-ol-3-one, trans-testosterone, and a long list of historic trade and chemical names. NIST Chemistry WebBook A reference-standard supplier’s Safety Data Sheet lists the synonym 17-beta-hydroxy-androst-4-en-3-one alongside NSC 9700. Cayman Chemical SDS

These identifiers should appear consistently in quotations, purchase orders, quality records, package labels, and receiving documentation.

Names and Synonyms

The material may appear under several names:

  • Testosterone
  • Testosterone base
  • Testosterone, no ester
  • 4-Androsten-17-beta-ol-3-one
  • 17-beta-Hydroxyandrost-4-en-3-one
  • trans-Testosterone
  • Androst-4-en-3-one, 17-hydroxy-, (17-beta)-
  • Delta-4-Androsten-17-beta-ol-3-one
  • CAS 58-22-0

Historic names that appear in older catalogues and archives include Androlin, Andrusol, Testobase, Testosteroid, Virormone, and Testoviron T. NIST Chemistry WebBook

For procurement accuracy, the clearest description is Testosterone Base Powder, CAS 58-22-0, specified as the unesterified form.

Testosterone Base vs Testosterone Esters

This comparison is the single most important distinction on the page, because buyers frequently confuse base material with esterified testosterone.

Feature Testosterone Base Testosterone Esters
Ester group None One ester chain present
Active content Full mass is testosterone Part of the mass is ester
100 mg contains 100 mg testosterone Less than 100 mg testosterone
CAS number 58-22-0 A different CAS per ester
Molecular weight 288.42 g/mol Higher, depending on the ester
Material type Single compound Multiple distinct compounds

For illustration, each ester has its own identity:

Ester CAS number Molecular formula Molecular weight
Testosterone Base 58-22-0 C19H28O2 288.42 g/mol
Testosterone Propionate 57-85-2 C22H32O3 344.49 g/mol
Testosterone Phenylpropionate 1255-49-8 C28H36O3 420.58 g/mol
Testosterone Enanthate 315-37-7 C26H40O3 Approximately 400.6 g/mol
Testosterone Cypionate 58-20-8 C27H40O3 Approximately 412.61 g/mol
Testosterone Decanoate 5721-91-5 C29H46O3 Approximately 442.68 g/mol

The “100 mg equals 100 mg” logic in the supplied draft is correct in principle: ester weight is subtracted from active content in esterified products, and base material carries no such deduction. That fact should be stated as a chemical property, not as a reason to prefer the product.

Testosterone Base Powder Appearance

AAS Raw Pharma describes the product as white or off-white crystalline powder. Supplier Safety Data Sheets describe a white or creamy-white powder solid, and analytical-standard suppliers list the material as a powder. PCCA SDS Merck

Colour and texture may vary slightly between batches and confirm neither identity nor purity. Visual inspection should be one element of an incoming-material procedure that also includes documentation verification and appropriate analytical testing.

Testosterone Base Powder Assay

The AAS Raw Pharma specification lists a minimum assay of 99%, with the product title stating 99.8% purity. These two figures should be reconciled before publication. Either the listing claims a typical or certified batch result of 99.8% with a release threshold of 99%, or it should state a single figure that the current COA actually supports.

For context on how differently reference products are specified, one analytical-standard listing gives a purity of at least 98% for testosterone powder, a reference-standard supplier offers material at 95% or above for its smaller research packs, and a pharmacopoeial reference standard is supplied as neat material without a headline percentage at all. Merck CATO Sigma-Aldrich

Those figures describe different products and testing programmes. They cannot substantiate the AAS Raw Pharma batch, which must be documented on its own Certificate of Analysis.

Certificate of Analysis

A Certificate of Analysis, or COA, is a batch-specific quality document summarising tests performed and results obtained for a defined lot. Depending on the AAS Raw Pharma specification, a COA may include:

  • Product name and CAS number
  • Batch or lot number
  • Manufacturing or testing date
  • Appearance result
  • Identity test
  • Assay or content result
  • Related substances
  • Water content or loss on drying
  • Residue on ignition
  • Residual-solvent information
  • Specific optical rotation, where specified
  • Melting range
  • Acceptance criteria
  • Analytical method
  • Retest or expiry information
  • Storage recommendation
  • Quality authorisation

Customers should verify that the lot number on the COA matches the number on the package label and should retain the documents with their incoming-material and release records.

A practical buyer’s guide to raw testosterone sourcing recommends confirming that the COA reports suitable analytical testing, that batch numbers are cross-checked between certificate and packaging, and that packaging is properly sealed and protective — a reasonable framework for evaluating any supplier, including AAS Raw Pharma. Alibaba Buyer’s Guide

Quality-Control Considerations

Quality evaluation of a steroidal raw material can extend well beyond one assay figure. Depending on the agreed specification and lawful intended application, assessment may cover:

  • Chemical identity
  • Assay or content
  • Related substances or impurities
  • Residual solvents
  • Water content or loss on drying
  • Residue on ignition
  • Elemental impurities
  • Specific optical rotation
  • Melting range
  • Appearance
  • Packaging integrity
  • Batch traceability

AAS Raw Pharma should claim only tests that were actually performed and documented for the supplied batch. Avoid describing the product as HPLC tested, GC-MS verified, NMR confirmed, heavy-metal tested, residual-solvent tested, sterile, endotoxin-free, or pharmacopoeia compliant unless those results appear in the batch records.

Customers should note that testosterone is described in reference literature as easily oxidised, which makes appropriate packaging, light protection, and documented storage conditions a genuine quality variable rather than a formality. PubChem

Grade and Standards

The supplied draft describes this material as a pharmaceutical raw material suitable for Testosterone Base Powder replacement therapy and other treatments. That framing should be removed. A bulk raw material is not a medicine, and AAS Raw Pharma should not present it as treatment for any condition.

Describing the product as pharmaceutical grade does not by itself establish that the powder is:

  • GMP manufactured
  • Compliant with USP, BP, EP, or IP
  • Sterile or injectable
  • Endotoxin controlled
  • Approved by any regulator
  • Released for human or veterinary treatment

If the material is manufactured against an internal or enterprise specification, describe it that way. If it meets a recognised standard, name that standard and support it with the applicable batch documentation. Several raw-material listings attach “USP grade,” “GMP,” or “pharma grade” labels to testosterone products without publishing the supporting evidence; those claims should not be copied across.

Storage of Testosterone Base Powder

Storage conditions vary between product formats in published references. One supplier Safety Data Sheet directs that the container be kept tightly sealed and stored in accordance with the product insert, another references USP-NF tight-container storage, an analytical-standard listing specifies room temperature, a European Pharmacopoeia reference standard specifies 2-8 degrees C, and a Chinese reference-standard listing also states 2-8 degrees C. Cayman Chemical SDS PCCA SDS Merck Sigma-Aldrich EP CATO

Those conditions apply to those specific formats. The correct condition for the AAS Raw Pharma raw powder should come from its own label, stability data, or specification.

General practice:

  • Keep the container tightly closed
  • Protect the material from light
  • Store in a cool, dry area away from heat
  • Limit exposure to air, given the reported oxidation sensitivity
  • Prevent contamination with moisture or other chemicals
  • Store in a secure, access-controlled location
  • Maintain clear batch and inventory identification
  • Keep it away from food, feed, and consumer products

Do not publish a shelf life or temperature range without supporting documentation.

Safety and Handling

Testosterone Base Powder should be treated as a hazardous substance in a professional setting. PubChem’s hazard summary lists irritant, health-hazard, and environmental-hazard classifications for the substance. PubChem Reference suppliers describe testosterone as intended for research use and state that it is not for human or veterinary diagnostic or therapeutic use. Cayman Chemical SDS

Appropriate handling controls may include:

  • Restricted access to trained, authorised personnel
  • Suitable gloves, eye protection, and protective clothing
  • Prevention of dust generation during sampling and transfer
  • Appropriate ventilation
  • Controlled weighing, sampling, and transfer procedures
  • Dedicated or properly cleaned equipment
  • Cross-contamination controls
  • Documented spill response
  • Inventory reconciliation
  • Approved waste-disposal procedures

The powder must not be tasted, swallowed, inhaled, injected, or applied to the body, and must never be administered to a person or animal. It must be kept away from children and unauthorised persons.

Controlled-Substance Status

Testosterone Base Powder is a controlled substance in a number of jurisdictions. Sigma-Aldrich lists testosterone material under USDEA Schedule III, UK Home Office Schedule 4.2, and Canadian controlled-drug legislation. Merck A second supplier listing records the same Schedule III classification for its testosterone reference material. Sigma-Aldrich

Classification differs by country. Depending on destination and intended use, a purchaser may require:

  • Controlled-substance registration
  • Research authorisation
  • Pharmaceutical or veterinary manufacturing licence
  • Import or export permit
  • End-user declaration
  • Secure storage and inventory reporting
  • Special disposal records

The buyer should obtain independent legal and regulatory advice where necessary. Publishing this product page does not establish that the substance may be acquired, imported, or used in any particular location.

Statements to Remove From the Original Draft

The supplied draft contains clinical claims, personal-use guidance, and shipping language that are inappropriate for a raw-material product page. These should be removed or rewritten:

Remove or rewrite Reason
“For disease-free testosterone replacement therapy, male menopause, impotence and other diseases treatment” Clinical indication claims for a raw chemical
“Injectable steroid” as the product description The listing is a bulk powder, not a finished injectable
“Very potent and very powerful” Promotional performance framing
“Bodybuilders often consider it the base steroid to most all cycles” Cycle culture and personal-use guidance
“Dramatic gain in muscle size and strength” Performance claim
“Overall sense of well being and increases libido and sex drive” Personal-use outcome claim
“Aromatizes very easily and therefore estrogen buildup” Pharmacological guidance irrelevant to raw-material supply
Anti-estrogen recommendations (Anastrozole, Proviron, Tamoxifen, Letrozole, Exemestane) Clinical and self-medication advice
Androgenic side-effect discussion Adverse-event guidance for personal use
Stacking with Deca 250 or Boldenone 200 Cycle and stacking instructions
“400-1200 mg per week, 8-20 week cycles” High-risk dosing guidance
“Women typically see desirable results from doses of 50-100 mg per week” Dosing guidance
“Quality Guarantee 100%” Absolute claim not substantiated by a batch report
“100% custom rate” Unclear and unverifiable
“Well disguised packing” Suggests customs or detection evasion

Removing these passages reduces unsubstantiated-claim risk and keeps the listing focused on what the product actually is: a documented raw chemical material for lawful professional use.

Raw Powder Is Not a Finished Injectable Product

A crystalline raw material is fundamentally different from a sterile finished medicine. Manufacturing a regulated injectable requires controls that may include approved formulation development, qualified starting materials, validated facilities and processes, sterility assurance, endotoxin control, particulate testing, container-closure qualification, stability studies, finished-product release testing, and regulatory authorisation.

No assay figure demonstrates sterility, freedom from endotoxins, injectable suitability, clinical safety, or regulatory approval. AAS Raw Pharma does not provide compounding, conversion, solvent, carrier, filtration, sterilisation, injection, dosage, or administration instructions.

Intended Professional Applications

Subject to local law and customer qualification, Testosterone Base Powder may be relevant to:

  • Analytical reference and comparison work
  • Chemical identification studies
  • Chromatographic method development
  • Method validation and verification
  • Forensic and toxicological research
  • Impurity and degradation research
  • Stability and oxidation studies
  • Quality-control method evaluation
  • Institutional scientific research
  • Legally authorised pharmaceutical development
  • Approved manufacturing research

Availability does not authorise any particular use. Each buyer must confirm that its organisation, personnel, facilities, licences, and intended activity comply with the applicable regulatory framework.

Packaging and Logistics

Packaging should protect the powder from light, moisture, oxidation, contamination, and physical damage while maintaining clear product and batch identification. Options may include:

  • Sealed foil bags
  • Tins or rigid secondary containers
  • Protective inner packaging
  • Labelled commercial packs
  • Approved bulk containers
  • Custom quantity packaging by agreement

The supplied draft lists foil bag or tin packaging, which is consistent with common practice for this class of material. Every package should identify the product, CAS number, batch reference, quantity, and relevant handling information.

Packaging must satisfy applicable carrier, export, import, and destination requirements. AAS Raw Pharma does not offer disguised, mislabeled, or falsely declared shipments, and shipping documents and customs declarations must accurately identify the goods.

Sample and Bulk Supply

Samples may be available to qualified laboratories, institutions, and authorised manufacturers, subject to inventory, customer verification, destination law, and intended lawful use. Sample availability and any associated charges should be confirmed in writing.

For a sample or bulk quotation, provide:

  1. Product name and CAS number
  2. Required quantity
  3. Destination country
  4. Registered company or institution
  5. Intended lawful application
  6. Required purity or specification
  7. Preferred packaging
  8. Required documentation
  9. Applicable licences or permits
  10. Requested delivery schedule

Availability, minimum order quantity, pricing, capacity, and lead time should be confirmed in a formal quotation. Do not advertise “free samples” unless that offer is current and governed by clear terms.

Why Choose AAS Raw Pharma?

AAS Raw Pharma supports qualified customers seeking documented steroidal raw materials for lawful professional applications.

Stated High Purity

The product carries a stated assay of 99% minimum, with the listing title stating 99.8% purity, subject to the analytical results documented for the supplied batch.

Ester-Free Active Material

The product is the unesterified base compound, so the full weighed mass is testosterone rather than a portion of it.

Correct Chemical Identification

The product is described using its correct chemical name, CAS number, molecular formula, and molecular weight, drawn from authoritative reference data.

Batch Documentation

Customers may request the available COA, SDS, specification, and supporting technical information for the current batch.

Factory-Direct Commercial Supply

Direct sourcing can support competitive quotations for approved development and bulk requirements. Final pricing depends on quantity, testing, packaging, stock, and destination. Buy Testosterone Base Powder from us today

Flexible Order Quantities

Sample, development, and bulk requirements can be assessed according to stock, customer qualification, and applicable regulations.

Secure Packaging

Packaging is selected to protect the powder from light, moisture, and contamination, and to preserve product and batch identification throughout lawful storage and transport.

International Enquiry Support

The sales team can review logistics options for destinations where exportation, transportation, importation, possession, and intended use are lawful.

Responsive Customer Service

Support is available for specifications, documentation, quotations, packaging, and shipment enquiries. Any discrepancy should be reported promptly with the relevant order and batch details.

How to Request a Quotation

Send AAS Raw Pharma complete and accurate purchasing information:

  1. Product: Testosterone Base Powder
  2. CAS: 58-22-0
  3. Quantity: Sample, development, or bulk
  4. Destination: Country and delivery location
  5. Buyer: Registered company, laboratory, or institution
  6. End use: Clear lawful professional application
  7. Specification: Required assay and test profile
  8. Packaging: Preferred format and pack size
  9. Documents: COA, SDS, or other required records
  10. Permits: Applicable import or controlled-substance authorisations

AAS Raw Pharma may request additional information before accepting an order. Submission of an enquiry does not guarantee availability, customs clearance, or approval.

International Shipping and Compliance

International delivery may be considered where the shipment is lawful and accepted by an appropriate carrier. Possible providers may include DHL, FedEx, UPS, TNT, EMS, or a specialist freight service, depending on route, quantity, classification, and packaging.

The buyer is responsible for confirming import eligibility, customs classification, controlled-substance rules, pharmaceutical or research licensing, carrier acceptance, duties and taxes, storage obligations, and local possession requirements.

Because testosterone is controlled in many countries, an import may require documentation and licensing that a non-controlled chemical would not. AAS Raw Pharma does not guarantee customs clearance and does not support deceptive labels, false values, or inaccurate declarations.

Important Use Disclaimer

This page provides technical and commercial information about a raw chemical material. It does not recommend Testosterone Base Powder for testosterone replacement therapy, bodybuilding, muscle growth, strength, libido, athletic performance, mood, or any personal application.

No dosage, cycle, injection, stacking, anti-estrogen, or treatment guidance is included. Such information is inappropriate for a bulk raw ingredient and could facilitate unsafe or unlawful administration.

AAS Raw Pharma does not claim that this raw material diagnoses, treats, cures, or prevents any disease. Any legitimate medical use of a finished medicine must be determined by a licensed healthcare professional and governed by the relevant regulator.

Frequently Asked Questions

What is Testosterone Base Powder?

Testosterone Base Powder is the unesterified, crystalline raw form of testosterone, supplied for qualified research, analytical, and legally authorised professional applications.

What does “no ester” mean?

It means the testosterone molecule carries no attached ester chain. The product is the parent compound itself rather than an esterified derivative.

Why does the base form contain more active material by weight?

Because no ester fraction is present, the entire weighed mass is testosterone. In esterified products, part of the molecular mass is the ester group.

What is the CAS number?

The CAS number is 58-22-0.

What is the molecular formula?

The molecular formula is C19H28O2.

What is the molecular weight?

The molecular weight is approximately 288.42 g/mol.

What does the powder look like?

The AAS Raw Pharma specification describes a white or off-white crystalline powder. Published Safety Data Sheets describe a white or creamy-white powder solid.

What is the melting point?

Supplier Safety Data Sheets give a melting range of approximately 153-157 degrees C.

What is the stated assay?

The specification lists a minimum assay of 99%, with the listing title stating 99.8% purity. Confirm the exact batch figure from the Certificate of Analysis.

Is a Certificate of Analysis available?

Batch documentation may be available on request. Customers should confirm the exact COA, SDS, and specification supplied with their order.

Is the raw powder sterile?

Sterility must not be assumed. Unless a batch has been produced, tested, and released to a documented sterile specification, treat it as non-sterile raw material.

Is it ready for injection?

No. Raw powder is not a sterile injectable preparation and must not be injected or administered.

Is it the same as Testosterone Enanthate or Cypionate?

No. Those are esterified testosterone products with different CAS numbers, formulas, and molecular weights.

Does AAS Raw Pharma provide dosage, cycle, or anti-estrogen advice?

No. Dosing, cycle, injection, stacking, and ancillary-drug guidance is inappropriate for a bulk raw chemical.

How should it be stored?

Keep it tightly closed and protected from light in a cool, dry, secure location. Follow the exact conditions stated on the AAS Raw Pharma label and documentation, given the material’s reported oxidation sensitivity.

Is a sample available?

Samples may be available to qualified customers, subject to inventory, intended use, verification, destination law, and commercial terms.

Is bulk supply available?

Bulk enquiries can be assessed according to stock, production capacity, documentation, quantity, customer qualification, and destination requirements.

How is it packaged?

Possible formats include sealed foil bags, tins, protective containers, or approved bulk packaging, depending on quantity and transport needs.

Can AAS Raw Pharma ship internationally?

International delivery may be possible where exportation, transport, importation, possession, and intended use are lawful.

Is customs clearance guaranteed?

No. The buyer is responsible for permits, declarations, duties, taxes, and destination-country requirements.

How do I request a quotation?

Provide the quantity, destination, organisation details, intended lawful use, packaging preference, and required documentation. AAS Raw Pharma can then assess the enquiry. Contact us today to make inquiry about Testosterone Base Powder

 

Testosterone Base Powder Specifications

Specification Product details
Product name Testosterone Base Powder
Alternative description Testosterone, no ester
Chemical name 4-Androsten-17-beta-ol-3-one
Alternative chemical name 17-beta-Hydroxyandrost-4-en-3-one
CAS number 58-22-0
EINECS number 200-370-5
Molecular formula C19H28O2
Molecular weight 288.42 g/mol
Exact mass 288.4244
Appearance White or off-white crystalline powder
Physical form Crystalline solid
Melting range Approximately 153-157 degrees C
Solubility Practically insoluble in water; soluble in alcohol and several organic solvents
Stated assay 99% minimum, subject to batch documentation
Listed grade Pharmaceutical raw-material grade
Packaging Sealed foil bag or tin
Documentation Batch-specific COA and technical documents where available
Intended users Qualified laboratories, institutions, and authorised manufacturers
Direct administration Not permitted; this is not a finished product

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Message:

Verification:
2 + 4 = ?

Maybe you like also